The TLS-C3 charger has a intelligent charging management,Charger CPU sets a standard charging curve of all the batteries between
7AH and 100AH,to make charging safer and more efficient according to different battery capacity charging,adopting temperature
compensation technology,then control the size of charging current according to the change of temperature,effectively maintain the
activity of battery inside substance,not only ensure charging efficient,and extend battery life.input overvoltage,undervoltage,overcurrent,
overtemperature of environment, fall off protection.
TLS-C3 can be used for 2-3kw inverter power source(EPS emergency power supply/UPS uninterruptible power supply,etc),this charger
has intelligent charging management,this series charger CPU sets standard charging curve of all the batteries between 7AH and 100AH,
according to the different capacity of battery to make charging safer and more efficient.adopting temperature compensation technology
,can control the size of charging current according to the change of temperature.effectively maintain the battery internal substance activity.
not only ensure the charging efficiency,and extend battery life.meanwhile having advanced three-stage charging mode,constant current,
constant voltage,automatic conversion charging technology,maximum activate battery to save charging time,under the state of battery
capacity saturated,CPU adopt intermittent charging mode,extend battery life.
Features:
● New type of three-stage charging algorithm
● CPU whole process of automatic control
● Intelligent charging management mode
● LED indication
● Input overvoltage,undervoltage,overcurrent,overtemperature protection of the environment
● Energy conservation and environmental protection design
型 号 |
TLS-C3 |
直流输出电压 |
12V/24V/48V/96V |
输出电流范围 |
0-5A (可定制电流0-100A) |
直流输出电压可调范围 |
±10% |
输出对应电池容量 (电池的放电速率C=电池的实际放电电流(A)/电池的标称容量(Ah)) |
充电电流0.1C,尖峰充电电流为0.2C |
输入电压范围及频率 |
185~260VAC连续输入;47~63Hz |
波纹电压 |
≤600mv |
效 率 |
输入220VAC满载 ≥90% |
高温保护 |
≥85℃自动切断输出 |
静态泄放电流 |
0.25mA |
温度系数 |
±0.03%/℃(0-50℃) |
冷却方式 |
内置风机 |
抗 震 性 |
10~500Hz.2G 10min,/1周期,时长60分,各轴 |
隔离耐压性 |
输入输出间,输入与外壳,输出与外壳:1500V(1min) |
隔离电阻 |
输入输出间,输入与外壳,输出与外壳:500VDC/100MΩ |
工作温度,湿度 |
-20℃~+60℃, 不结露20%~95%RH |
LED状态指示 |
分别指示恒流、恒压、浮充、故障 |
外行尺寸 |
98×198.5×50mm |
重 量 |
650g |
标 准 |
GB17945-2010 |
备注:其它规格可按要求订做。 |
注1:标准出厂输出电压为每节电池充电电压为13.8V,如用户需要调整输出电压可另, 行商定
注2:以上所指电池为标称12V的铅酸蓄电池。